sections of linoleum

December 1, 2010 by: admin

Attaching come off the edges and separate sections of linoleum. Peeling edges and separate sections of linoleum is because the paste is applied to the base with a damp or not cleaned from dust. Peeling may also result from falling into the seam of different solvents or water.
When correcting the defect must be thoroughly clean the base of debris, dust, polishes, well dried, then re-glue the edges. For these purposes it is desirable to employ the most durable and waterproof mastic.

Replacing worn-out parts of sex. After prolonged use floor with the floors are worn. To the replacement of worn-out parts to maintain the same appearance of coatings, new pieces of linoleum should match the color and thickness of the old surface, and pieces of marble-like linoleum, in addition, must be carefully tailored to the drawing.

Worn area of linoleum cut in a square, rectangle or other shape and removed. The base was purified from an adhesive mastic, and then put a new piece slightly larger than the cut site. At opposite ends of it temporarily nailed two nails that he has not moved at prirezke. Prirezku carry on the line and directly through both layers, which provides a seam smooth and without gaps. After gluing the inserted pieces on top of them laid a sheet of plywood and pressed load.

Filed under: linoleum
Tags:

Comments are closed.